Contemporary-control-systems EISC Configurable Switches Installation Guide Manuel d'utilisateur télécharger pdf

EISC-100T

Ethernet Configurable Switching Hub

INSTALLATION GUIDE

Introduction

The EISC-100T (EISC) configurable switch in the CTRLink

family

provides capabilities beyond those of standard Plug and Play (PnP)

switches. Besides conventional features — auto-negotiation, 10/100

Mbps data rate, flow control, half- or full-duplex operation — the EISC

has advanced features such as VLAN, trunking, Quality of Service (QoS)

and a programmable fault relay that can be connected to a supervisory

system. Individual port parameters can be configured via a console port

attached to a Windows

-based workstation. Port status can also be

monitored through the console port using the Modbus protocol, making it

easy to interface the EISC with supervisory control equipment. These

features make the EISC one of the most versatile of Industrial Ethernet

switches available.

Configuration is accomplished via a console port connected to a

Windows-based configuration program included with the product.

Modbus protocol and register information is also provided so the switch

can be configured or monitored by a Modbus master device. Each port

parameter (data rate, duplex and flow control) can be pre-set via the

console port or set automatically via auto-negotiation. And a unique feature

displays the status (integrity) of the cable attached to any each port.

Each port automatically optimizes its data rate to 10 Mbps or 100 Mbps

— but data rate and duplex settings can be specified, if desired.

Each port negotiates flow control, but control can be disabled for

individual ports. The PAUSE function is supported for full-duplex links.

The backpressure scheme is used for half-duplex segments.

The EISC can be powered from wide-range, low-voltage

AC or DC sources and has provisions for either DIN-rail

or panel mounting.

1 2 3 4 5 6 7 8

Résumé du contenu

Page 1 - EISC-100T

EISC-100T Ethernet Configurable Switching Hub INSTALLATION GUIDE Introduction The EISC-100T (EISC) configurable switch in the CTRLink® fami

Page 2 - Specifications

TD021000-0IF 2 SpecificationsElectrical INPUT DC AC Voltage: 10–36 V 8–24 V Power (max): 12 W 12 VA Frequency: N/A 47-63 Hz Relay Contacts:

Page 3 - Installation

TD021000-0IF 3 Installation Mounting The EISC is designed for mounting in an industrial enclosure or wiring closet using either set of the provided

Page 4

TD021000-0IF 4 Powering The EISC requires low-voltage power — AC or DC — via a removable keyed four-pin connector which accepts 16–18 AWG con

Page 5

TD021000-0IF 5 AC Powered The EISC can be powered by an AC voltage in the range of 8–24 V capable of delivering 12 VA of apparent powe

Page 6 - Operation

TD021000-0IF 6 Operation Switching The EISC uses an 8K-address look-up table augmented with 64 entries of Content Addressable Memory. A

Page 7 - Declaration of Conformity

TD021000-0IF 7 Need More Help Installing this Product? More comprehensive information can be found on our web site at www.ccontrols.com.

Page 8 - TD021000-0IF

TD021000-0IF 8 [This page is deliberately left blank.]

Commentaires sur ces manuels

Pas de commentaire

Contemporary-control-systems EISC Configurable Switches Installation Guide Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel Contemporary-control-systems EISC Configurable Switches Installation Guide. Contemporary Control Systems EISC Configurable Switches Installation Guide User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Contemporary-control-systems EISC Configurable Switches Installation Guide