Contemporary-control-systems BASrouter Installation Guide (Firmware 2.x) Manuel d'utilisateur télécharger pdf (Page 6)

TD071200-0IK

2.7 Connectors

3-pin (MS/TP) Pin Assignments

(Also explained on product label)

RJ-45 (MDI Ethernet) Pin Assignments

1 TD + 3 RD +

2 TD – 6 RD –

(All other pins are unused.)

USB Mini B Connector (Aux)

This connector is only used for

firmware upgrades.

EIA-485 Bias and Termination Jumpers

U Install jumper to apply pull-up bias.

T Install jumper to terminate bus.

D Install jumper to apply pull-down bias.

(All jumpers are installed by default.)

2.8 Mechanical

Figure 5 — Product Dimensions

Figure 2 — RJ-45 Connector

Figure 3 — USB Connector

Figure 4 — Internal Jumpers

Figure 1 — 3-pin Connector

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

Pas de commentaire

Contemporary-control-systems BASrouter Installation Guide (Firmware 2.x) Manuel d'utilisateur Page 6