
TD120100-0IC
3
SPECIFICATIONS
Electrical (± 10%)
Input voltage: 24 V 24 V
Input power: 6 W 10 VA
Input frequency: N/A 47–63 Hz
(Intended for use with Class 2 circuits only.)
Communications
Compliance IEEE 802.3 ANSI/ASHRAE 135
Protocols supported BACnet/IP BACnet MS/TP (ISO 16484-5)
Data rate 10 Mbps, 100 Mbps 9.6, 19.2, 38.4, 57.6, 76.8, 115.2 kbps
Physical layer 10BASE-T, 100BASE-TX EIA-485, 3-wire isolated
Cable length 100 m (max) 1200 m (max) up to 76.4 kbps
1000 m (max) at 115.2 kbps
Port connector Shielded RJ-45 5-pin removable terminal
LEDs L (Link) D (Duplex) Tx Rx
Green=100 Mbps Green=Full-duplex Green=Activity Green=Activity
Yellow=10 Mbps Off=Half-duplex
Flash=Activity Flash=Collision
Protocol Compliance
BACnet/IP: ASHRAE 135-2008, Annex J, B-ASC Profile
Mounting TS-35 DIN-rail
Shipping Weight 1 lb. (.45 kg)
Regulatory Compliance
CE Mark — CFR 47, Part 15 Class A — RoHS
UL 508, C22.2 No. 142-M1987
Commentaires sur ces manuels